Home / Products / Thermocouple Sheath / Content

K Type Thermocouple Ceramic Sheath

Send Inquiry

Chat Now

Product Description

k type thermocouple ceramic sheath

The k type thermocouple ceramic sheath is a sensor used to measure temperature in a range of different processes and consists of two wire legs made of different metals that are connected together at both ends to form two junctions. The hot junction or measuring junction is connected to the object whose temperature is to be measured. The cold junction or reference junction is connected to the object of known temperature. When the measuring junction is placed on the hot object, a voltage or potential difference is generated between the measuring junction and the reference junction. This voltage can then be converted into a temperature measurement using a thermocouple reference meter. This process is also known as the Seebeck effect.

This product is for industrial use only.

• The product is for indoor use only and not waterproof. Keep out of water or any solutions.

• Beware it may cause an abnomally high temperature and result in a premature wire breakage, if low in degree of adhesion to workpiece.

• Ask your sales representatives to consult with the case the heater use bonded to workpiece.

• Do not apply excessive external forces(traction, bending, etc) onto lead wire joint.

• Do not heat without contact to workpiece.

• Do not place heaters on top of each other when in operation.

Technial Specifications

Heater surface temperature	150℃ in standard usage. (Depending on operating environments, operating tempertures may vary)
Voltage	~ 200V
Watt densities	① Max: 1.0W/cm2 when suspended in still air ② Max: 1.5W/cm2 when fitted closely to workpiece
Insulation resistance	100MΩ or more at 500V DC
Thickness	0.2mm or less (except for lead wire joint)
Heater size limitations	W20 ✕ H20mm ~ W300 ✕ H300mm
Product code	PI-